note

[ESP32/IoT/Robot Introduction #01] How to add ESP32 to Arduino IDE | Explaining everything from board selection to connection verification

Once you get your hands on an ESP32, you'll want to start connecting sensors and motors right away. In this article, we will prepare your computer to upload programs to it before we dive into that.
Hackaday

Birduino Plays Bird Calls On Demand With NFC-enabled Cards

All [Hannah Robertson]’s Birduino needs is for one to tap an NFC-enabled card to the reader, and the device plays one of the ...
blog.csdn

arduino-builder：Arduino CLI底层编译器与CI/CD固件构建核心工具

arduino-builder 是 Arduino 官方维护的 Go 语言命令行构建工具，作为 Arduino CLI 的底层编译引擎，负责解析草图、管理库依赖、拼接编译命令并调用真实工具链（如 avr-gcc），生成可烧录固件。它支持 FQBN 精确指定硬件平台，适用于 CI/CD 自动化、多平台批量构建与定制化宏注入，是实现确定性、可复现嵌入 ...
blog.csdn

Maixduino 实战：K210 上跑 Arduino 与 KPU 推理

2.2 写一个能跑的 Blink 和串口输出 环境配好之后，先别急着上摄像头和 KPU，用最经典的 Blink 验证工具链是否通畅。 Maixduino 的板载 LED 通常接在 GPIO 13 上，但不同版本可能有差异，保险做法是查一下板子的引脚图。